Microphones - Cabled Archives - Event Sound and Lighting

AKG – C460B CONDENSER MICROPHONE

Hire

$18.00

Features: <ul> <li>Solid state circuitry throughout</li> <li>Ultra low noise figures</li> <li>High operation reliability</li> <li>low power consumption</li> <li>extended long-life stability</li> <li>Built-in attenuation switch with 0 to 10 dB position</li> <li>Bass-cut switch with the following possible combinations: <ul> <li>◦linear response (no bass-cut)</li> <li>bass-cut with onset at 70 Hz</li> <li>bass-cut with onset at 150 Hz</li> </ul> </li> <li>High quality cardioid capsule with exceptionally flat on-axis frequency response</li> <li>High temperature stability, reliable construction</li> <li>Gold plated, self-cleaning connector pins for high resistance to humidity</li> </ul> The ruler-flat frequency response and consistent polar pattern of this make the CK61 Capsule ideal for critical recording and live sound applications where consistent suppression of off-axis sound is an important requirement.

Reserve Now

AUDIO TECHNICA – 4033

Hire

$18.00

Features: <ul> <li>Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients</li> <li>Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity</li> <li>The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use</li> <li>Floating-construction capsule assembly provides isolation from noise and vibration</li> <li>Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections</li> <li>State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards</li> <li>Custom shock mount provides superior isolation</li> </ul> Specifications: <ul> <li>Element: Fixed-charge back plate, permanently polarized condenser</li> <li>Polar Pattern: Cardioid</li> <li>Frequency Response: 30-20,000 Hz</li> <li>Low Frequency Roll Off: 80 Hz, 12 dB/octave</li> <li>Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa</li> </ul>

Reserve Now

AUDIO TECHNICA – 4041 CARDIOID CONDENSER MICROPHONE

Hire

$18.00

<table class="productlist lists"> <tbody> <tr> <td class="specs">ELEMENT</td> <td>Fixed-charge back plate, permanently polarized condenser</td> </tr> <tr> <td class="specs">POLAR PATTERN</td> <td>Cardioid</td> </tr> <tr> <td class="specs">FREQUENCY RESPONSE</td> <td>20-20,000 Hz</td> </tr> <tr> <td class="specs">LOW FREQUENCY ROLL-OFF</td> <td>80 Hz, 12 dB/octave</td> </tr> <tr> <td class="specs">OPEN CIRCUIT SENSITIVITY</td> <td>-36 dB (15.8 mV), re 1V at 1 Pa</td> </tr> <tr> <td class="specs">IMPEDANCE</td> <td>100 ohms</td> </tr> <tr> <td class="specs">MAXIMUM INPUT SOUND LEVEL</td> <td>145 dB SPL, 1 kHz at 1% T.H.D.</td> </tr> <tr> <td class="specs">DYNAMIC RANGE (typical)</td> <td>121 dB, 1 kHz at Max SPL</td> </tr> <tr> <td class="specs">SIGNAL-TO-NOISE RATIO</td> <td>70 dB, 1 kHz at 1 Pa</td> </tr> <tr> <td class="specs">PHANTOM POWER REQUIREMENTS</td> <td>48V DC, 3.2 mA typical</td> </tr> <tr> <td class="specs">SWITCH</td> <td>Flat, roll-off</td> </tr> <tr> <td class="specs">WEIGHT</td> <td>4.2 oz (120 g)</td> </tr> <tr> <td class="specs">DIMENSIONS</td> <td>6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter</td> </tr> <tr> <td class="specs">OUTPUT CONNECTOR</td> <td>Integral 3-pin XLRM-type</td> </tr> <tr> <td class="specs">ACCESSORIES FURNISHED</td> <td>AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case</td> </tr> <tr> <td class="specs">AUDIO-TECHNICA CASE STYLE</td> <td>S1</td> </tr> </tbody> </table>

Reserve Now

AUDIO TECHNICA – 4050 MULTI-PATTERN CONDENSER MICROPHONE

Hire

$36.00

<table class="productlist lists"> <tbody> <tr> <td class="specs">ELEMENT</td> <td>Externally-polarized (DC bias) condenser</td> </tr> <tr> <td class="specs">POLAR PATTERNS</td> <td>Cardioid, Omnidirectional, Figure-of-eight</td> </tr> <tr> <td class="specs">FREQUENCY RESPONSE</td> <td>20-18,000 Hz</td> </tr> <tr> <td class="specs">LOW FREQUENCY ROLL-OFF</td> <td>80 Hz, 12 dB/octave</td> </tr> <tr> <td class="specs">OPEN CIRCUIT SENSITIVITY</td> <td>-36 dB (15.8 mV), re 1V at 1 Pa</td> </tr> <tr> <td class="specs">IMPEDANCE</td> <td>100 ohms</td> </tr> <tr> <td class="specs">MAXIMUM INPUT SOUND LEVEL</td> <td>149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)</td> </tr> <tr> <td class="specs">NOISE</td> <td>17 dB</td> </tr> <tr> <td class="specs">DYNAMIC RANGE (typical)</td> <td>132 dB, 1 kHz at Max SPL</td> </tr> <tr> <td class="specs">SIGNAL-TO-NOISE RATIO</td> <td>77 dB, 1 kHz at 1 Pa</td> </tr> <tr> <td class="specs">PHANTOM POWER REQUIREMENTS</td> <td>48V DC, 4.2 mA typical</td> </tr> <tr> <td class="specs">SWITCHES</td> <td>Polar selection; Flat, roll-off; 10 dB pad (nominal)</td> </tr> <tr> <td class="specs">WEIGHT</td> <td>18.0 oz (510 g)</td> </tr> <tr> <td class="specs">DIMENSIONS</td> <td>7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter</td> </tr> <tr> <td class="specs">OUTPUT CONNECTORS</td> <td>Integral 3-pin XLRM-type</td> </tr> <tr> <td class="specs">ACCESSORIES FURNISHED</td> <td>AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case</td> </tr> <tr> <td class="specs">AUDIO-TECHNICA CASE STYLE</td> <td>R1</td> </tr> </tbody> </table>

Reserve Now

AUDIO TECHNICA – 815B

Hire

$18.00

Features: <ul> <li>Designed for professional recording, broadcasting and film/TV/video production</li> <li>Provides the narrow acceptance angle desirable for long-distance sound pickup</li> <li>Excellent sound rejection from the sides and rear of mic</li> <li>Switchable low-frequency roll-off</li> <li>Operates on battery or phantom power</li> </ul> Specifications: <ul> <li>Element: Fixed-charge back plate, permanently polarized condenser</li> <li>Polar Pattern: Line + gradient</li> <li>Frequency Response: 30-20,000 Hz</li> <li>Low Frequency Roll Off: 180 Hz, 12 dB/octave</li> <li>Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa</li> <li>Impedance: Phantom: 500 ohms Battery: 600 ohms</li> <li>Maximum Input Sound Level: Phantom: 130 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.</li> <li>Dynamic Range: Phantom: 106 dB, 1 kHz at Max SPL Battery: 91 dB, 1 kHz at Max SPL</li> <li>Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa</li> <li>Phantom Power Requirements: 9-52V DC, 2 mA typical</li> <li>Battery Type: 1.5V AA/UM3</li> <li>Battery Current Life: 0.4 mA / 1200 hours typical</li> <li>Switch: Flat, roll-off (recessed)</li> <li>Weight: 7.1 oz (200 g)</li> <li>Dimensions: 18.11" (460.0 mm) long, 0.83" (21.0 mm) diameter</li> <li>Output Connector: Integral 3-pin XLRM-type</li> <li>Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; AT8135 windscreen; battery; protective carrying case</li> </ul>

Reserve Now

AUDIO TECHNICA – 853 (CHOIR MIC)

Hire

$18.00

<table class="productlist lists"> <tbody> <tr> <td class="specs">ELEMENT</td> <td>Fixed-charge back plate, permanently polarized condenser</td> </tr> <tr> <td class="specs">POLAR PATTERN</td> <td>Cardioid</td> </tr> <tr> <td class="specs">FREQUENCY RESPONSE</td> <td>30-20,000 Hz</td> </tr> <tr> <td class="specs">LOW FREQUENCY ROLL-OFF</td> <td>80 Hz, 18 dB/octave</td> </tr> <tr> <td class="specs">OPEN CIRCUIT SENSITIVITY</td> <td>Phantom: –42 dB (7.9 mV) re 1V at 1 Pa Battery: –43 dB (7.0 mV) re 1V at 1 Pa</td> </tr> <tr> <td class="specs">IMPEDANCE</td> <td>Phantom: 200 ohms Battery: 270 ohms</td> </tr> <tr> <td class="specs">MAXIMUM INPUT SOUND LEVEL</td> <td>Phantom: 133 dB, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.</td> </tr> <tr> <td class="specs">DYNAMIC RANGE (typical)</td> <td>Phantom: 109 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPL</td> </tr> <tr> <td class="specs">SIGNAL-TO-NOISE RATIO</td> <td>70 dB, 1 kHz at 1 Pa</td> </tr> <tr> <td class="specs">PHANTOM POWER REQUIREMENTS</td> <td>11-52V DC, 2 mA typical</td> </tr> <tr> <td class="specs">BATTERY TYPE</td> <td>1.5V AA/UM3</td> </tr> <tr> <td class="specs">BATTERY CURRENT / LIFE</td> <td>0.4 mA / 1200 hours typical (alkaline)</td> </tr> <tr> <td class="specs">SWITCH</td> <td>Off, on-flat, on-roll-off</td> </tr> <tr> <td class="specs">WEIGHT (MICROPHONE)</td> <td>0.5 oz (14 g)</td> </tr> <tr> <td class="specs">WEIGHT (POWER MODULE)</td> <td>4.9 oz (139 g)</td> </tr> <tr> <td class="specs">DIMENSIONS (MICROPHONE)</td> <td>1.34" (34.0 mm) long, 0.48" (12.2 mm) diameter</td> </tr> <tr> <td class="specs">DIMENSIONS (POWER MODULE)</td> <td>3.31" (84.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D</td> </tr> <tr> <td class="specs">OUTPUT CONNECTOR (POWER MODULE)</td> <td>Integral 3-pin XLRM-type</td> </tr> <tr> <td class="specs">CABLE</td> <td>25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector</td> </tr> <tr> <td class="specs">OPTIONAL INTERCHANGEABLE ELEMENTS</td> <td>UE-H hypercardioid (100°); UE-O omnidirectional (360°); UE-UL UniLine® (90°)</td> </tr> <tr> <td class="specs">ACCESSORIES FURNISHED</td> <td>AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8531 power module; AT8438 5/8"-27 stand adapter; battery</td> </tr> <tr> <td class="specs">AUDIO-TECHNICA CASE STYLE</td> <td>M12</td> </tr> </tbody> </table>

Reserve Now

AUDIO TECHNICA – AE2500 DUAL-ELEMENT INSTRUMENT MICROPHONE

Hire

$18.00

Features: <ul> <li>Revolutionary dual-element design represents a ground-breaking transducer achievement</li> <li>Two elements (condenser and dynamic) are enclosed in a single housing</li> <li>Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell</li> <li>Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones</li> <li>Robust design for enduring dependability on the road</li> <li>Integral 80 Hz HPF switch and 10 dB pad on condenser element</li> <li>Includes isolation clamp for shock protection, secure mounting and easy positioning</li> <li>Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each element</li> </ul> Specifications: <ul> <li>Polar Pattern: Cardioid</li> <li>Frequency Response: 20-17,000 Hz (condenser) 30-10,000 Hz (dynamic)</li> <li>Low Frequency Roll Off: 80 Hz, 12 dB/octave (condenser)</li> <li>Open Circuit Sensitivity: -51 dB (2.8 mV) re 1V at 1 Pa (condenser) -54 dB (1.9 mV) re 1V at 1 Pa (dynamic)</li> <li>Impedance: 100 ohms (condenser) 600 ohms (dynamic)</li> <li>Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser); 158 dB SPL, with 10 dB pad (nominal)</li> <li>Dynamic Range: 124 dB, 1 kHz at Max SPL (condenser)</li> <li>Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa (condenser)</li> <li>Phantom Power Requirements: 11-52V DC, 3 mA typical (condenser)</li> <li>Weight: 13.8 oz (390 g)</li> <li>Dimensions: 6.50" (165.0 mm) long, 2.17" (55.0 mm) maximum diameter</li> <li>Output Connector: Integral 5-pin XLRM-type</li> <li>Cable: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors</li> <li>Accessories: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch</li> </ul>

Reserve Now

AUDIX – M1255B – CHOIR MIC

Hire

$27.00

Specifications: <ul> <li>Transducer Type: Condenser</li> <li>Frequency Response: 50 Hz – 19 kHz</li> <li>Polar Pattern: Cardioid, Hypercardioid, Omni, Shotgun</li> <li>Output Impedance: 150 ohms</li> <li>Sensitivity: 38 mV (C), 32 mV (HC) 40 mV (O), 60 mV (S) / Pa @ 1k</li> <li>Equivalent Noise Level: 21 dB (A-weighted)</li> <li>Signal to Noise Ratio: 73 dB</li> <li>Maximum SPL: ≥130 dB</li> <li>Power Requirements: 18 – 52 V</li> <li>Connector: 3 pin mini-XLRm</li> <li>Materials / Finish: Machined brass / Black or White Finish</li> <li>Weight: 16 g / 0.56 oz</li> <li>Length: 54 mm / 2.1 in</li> </ul>

Reserve Now

AUDIX – MICROPOD18 W/BASE

Hire

$36.00

Specifications: <ul> <li style="list-style-type: none;"> <ul> <li>Transducer Type: Condenser</li> </ul> </li> </ul> Frequency Response: 50 Hz – 19 kHz Polar Pattern: Cardioid, Hypercardioid, Shotgun Output Impedance: 150 ohms Sensitivity: 9 mV (C), 8 mV (HC) , 62 mV (S) / Pa @ 1k Equivalent Noise Level: 21 dB (A-weighted) Signal to Noise Ratio: 73 dB Maximum SPL: ≥140 dB Dynamic Range: 119 dB Power Requirements: 18 – 52 V Connector: 3 pin mini-XLRm Materials / Finish: Machined brass / Black Finish Weight of M1250B: 20 g / 0.7 oz Length of M1250B: 54 mm / 2.1 in Length of Goosenecks: 157.5 mm / 373 mm / 430 mm 6” GN / 12” GN / 18” GN

Reserve Now