Showing 13–24 of 28 results

  • QUIK-LOK A50

    Hire
    • $18.00
    Reserve Now

  • SENNHEISER – E604

    Hire
    • $9.00
    <strong>Features:</strong> <ul> <li>Rugged reinforced glass-fibre body</li> <li>Low sensitivity to impact and handling noise</li> <li>Very high sound pressure handling capability</li> <li>Low distortion microphone</li> <li>Hum compensating coil</li> <li>Easy to position due to compact design</li> <li>Integral stand mount</li> </ul>
    Reserve Now

  • SHURE – BETA 57

    Hire
    • $12.60
    <strong>Features:</strong> <ul> <li>Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound</li> <li>Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound</li> <li>Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse</li> <li>Neodymium magnet for high signal–to–noise ratio output</li> <li>Minimally affected by varying load impedance</li> <li>Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration</li> <li>Legendary Shure quality and reliability</li> </ul> <strong>Specifications:</strong> <ul> <li>Type: Dynamic (moving coil)</li> <li>Frequency Response: 50 to 16,000 Hz</li> <li>Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.</li> <li>Output Level: Open Circuit Voltage -51 dBV/Pa* (2.8 mV) *1 Pa = 94 dB SPL</li> </ul>
    Reserve Now

  • SHURE – BETA 58

    Hire
    • $12.60
    <strong>Features:</strong> <ul> <li>Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect</li> <li>Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound</li> <li>Neodymium magnet for high signal–to–noise output</li> <li>Hardened steel mesh grille that resists wear and abuse</li> <li>Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration</li> <li>Minimally effected by varying load impedance</li> <li>Legendary Shure quality and reliability</li> </ul> <strong>Specifications:</strong> <ul> <li>Type: Dynamic (moving coil)</li> <li>Frequency Response:50 to 16,000 Hz</li> <li>Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.</li> <li>Output Level: Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL</li> </ul>
    Reserve Now

  • SHURE – BETA 87

    Hire
    • $12.60
    <strong>Features:</strong> <ul> <li>Smooth frequency response with gradual presence rise</li> <li>Highly consistent supercardioid polar pattern provides superior gain-before-feedback</li> <li>Electronic low-frequency roll-off compensates for proximity effect</li> <li>Wide dynamic range (117 dB) and low distortion characteristics</li> <li>Very low susceptibility to RFI and electromagnetic hum</li> <li>Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise</li> <li>Built-in pop filter reduces undesirable wind and breath sounds</li> <li>Legendary Shure quality and reliability</li> </ul> <strong>Specifications:</strong> <ul> <li>Type: Condenser (electret bias)</li> <li>Frequency Response: 50 to 20,000 Hz</li> <li>Polar Pattern: Supercardioid</li> <li>Phantom power required?: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3, Current Drain: 1.0 to 1.2 mA</li> </ul>
    Reserve Now

  • SHURE – BETA91

    Hire
    • $18.00
    <strong>Features:</strong> <ul> <li>Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound</li> <li>Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter</li> <li>Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments</li> <li>Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the “low-mid scoop” setting for a strong low frequency “punch” with plenty of higher frequency attack</li> <li>Requires no external mounting or accessories for ease of use and storage</li> <li>Furnished with zipper pouch</li> </ul>
    Reserve Now

  • SHURE – BETA98H

    Hire
    • $18.00
    <strong>Features:</strong> <ul> <li>The Beta 98 H/C and WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.</li> <li>The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.</li> <li>Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.</li> <li>The Beta98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)</li> <li>The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters</li> <li>Tailored frequency response for open, natural sound reproduction</li> <li>Compact, lightweight construction provides a low degree of visibility</li> <li>Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning</li> <li>Legendary Shure ruggedness and reliability</li> <li>Interchangeable replacement cartridges: <ul> <li>RPM108 : Cardioid</li> <li>RPM110 : Supercardioid</li> </ul> </li> </ul>
    Reserve Now

  • SHURE – KSM 109

    Hire
    • $18.00
    <strong>Features:</strong> <ul> <li>Incredibly smooth high end and tight, controlled bass</li> <li>Extended 20Hz-20kHz frequency response</li> <li>Tight cardioid pattern</li> <li>Transformerless Class-A preamp circuitry</li> <li>Switchable -15dB pad</li> </ul>
    Reserve Now

  • SHURE – SM 98

    Hire
    • $18.00
    <strong>Features:</strong> <ul> <li>Smooth wide response for accurate sound reproduction across the entire audio spectrum</li> <li>Symmetrical cardioid pattern, uniform with frequency out to 20 kHz, maximizes gain before feedback, minimizes need for isolation when picking up single instruments out of a group</li> <li>Switch-selectable 12 dB/octave low-frequency cutoff permits tailoring response to suit particular instruments or room conditions</li> <li>Very high SPL capability</li> <li>Very low distortion and high output clipping level</li> <li>Phantom powered by a range of voltages, from 11 to 52 Vdc</li> <li>Low susceptibility to RFI, electrostatic and electromagnetic hum</li> <li>Rugged construction of microphone and preamplifier for outstanding reliability</li> <li>Detachable cable at both microphone and preamplifier</li> <li>Usable over very wide range of temperature and humidity</li> <li>Supplied with unique swivel adapter for mounting on conventional microphone stands or goosenecks</li> <li>Optional accessories to increase microphone’s versatility include: A98MK, Drum Kit; A98-G18, Gooseneck Adapter; A98HA, Hanging Adapter; A98PF, Pop Filter</li> </ul>
    Reserve Now

  • SHURE – SM137

    Hire
    • $18.00
    <strong>Features:</strong> <ul> <li>Ultra-thin diaphragm for smooth high end and tight, controlled low end</li> <li>15dB pad for performance consistency across a wider range of high SPL sources</li> <li>Low self-noise and transformerless preamplifier circuitry</li> </ul>
    Reserve Now

  • SHURE – SM57

    Hire
    • $9.00
    <strong>Features:</strong> <ul> <li>Contoured frequency response for clean, instrumental reproduction and rich vocal pickup</li> <li>Professional-quality reproduction for drum, percussion, and instrument amplifier miking</li> <li>Uniform cardioid pickup pattern isolates the main sound source while reducing background noise</li> <li>Pneumatic shock-mount system cuts down handling noise</li> <li>Extremely durable under the heaviest use</li> <li>Frequency response: 40 to 15,000 Hz</li> <li>Replacement cartridge: R57</li> </ul> <strong>Specifications:</strong> <ul> <li>Type: Dynamic</li> <li>Frequency Response: 40 to 15,000 Hz</li> <li>Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency.</li> </ul>
    Reserve Now

  • SHURE – SM58S Microphone with Switch

    Hire
    • $9.00
    <strong>Features:</strong> <ul> <li>Frequency response tailored for vocals, with brightened midrange and bass rolloff</li> <li>Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise</li> <li>Pneumatic shock-mount system cuts down handling noise</li> <li>Effective, built-in spherical wind and pop filter</li> <li>Supplied with break-resistant stand adapter which rotates 180 degrees</li> <li>Legendary Shure quality, ruggedness and reliability</li> <li>Cardioid (unidirectional) dynamic</li> <li>Frequency response: 50 to 15,000 Hz</li> <li>Replacement cartridge: R59</li> </ul> <strong>Specifications:</strong> <ul> <li>Type: Dynamic (moving coil)</li> <li>Frequency Response: 50 to 15.000 Hz</li> <li>Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency</li> </ul>
    Reserve Now