0

Cart

Reserve Now – It’s as Easy as 1, 2, 3!

SHURE – BETA 58

SHURE – BETA 58

Hire
  • $12.60

Features:

  • Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
  • Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
  • Neodymium magnet for high signal–to–noise output
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Minimally effected by varying load impedance
  • Legendary Shure quality and reliability

Specifications:

  • Type: Dynamic (moving coil)
  • Frequency Response:50 to 16,000 Hz
  • Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
  • Output Level: Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL



Category:

SHURE – BETA 58
VOCAL MICROPHONE

The Shure BETA 58A® is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.

The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.

Additional information

Rental Pricing

Weekend Rate, Week Rate, 10 Day Rate, 14 Day Rate

Other Rental Options

  • SHURE – BETA 87

    Hire
    • $12.60
    <strong>Features:</strong> <ul> <li>Smooth frequency response with gradual presence rise</li> <li>Highly consistent supercardioid polar pattern provides superior gain-before-feedback</li> <li>Electronic low-frequency roll-off compensates for proximity effect</li> <li>Wide dynamic range (117 dB) and low distortion characteristics</li> <li>Very low susceptibility to RFI and electromagnetic hum</li> <li>Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise</li> <li>Built-in pop filter reduces undesirable wind and breath sounds</li> <li>Legendary Shure quality and reliability</li> </ul> <strong>Specifications:</strong> <ul> <li>Type: Condenser (electret bias)</li> <li>Frequency Response: 50 to 20,000 Hz</li> <li>Polar Pattern: Supercardioid</li> <li>Phantom power required?: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3, Current Drain: 1.0 to 1.2 mA</li> </ul>
    Reserve Now

  • AUDIO TECHNICA – 4033

    Hire
    • $18.00
    <strong>Features:</strong> <ul> <li>Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients</li> <li>Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity</li> <li>The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use</li> <li>Floating-construction capsule assembly provides isolation from noise and vibration</li> <li>Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections</li> <li>State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards</li> <li>Custom shock mount provides superior isolation</li> </ul> <strong>Specifications:</strong> <ul> <li>Element: Fixed-charge back plate, permanently polarized condenser</li> <li>Polar Pattern: Cardioid</li> <li>Frequency Response: 30-20,000 Hz</li> <li>Low Frequency Roll Off: 80 Hz, 12 dB/octave</li> <li>Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa</li> </ul>
    Reserve Now

  • AUDIO TECHNICA – AE2500 DUAL-ELEMENT INSTRUMENT MICROPHONE

    Hire
    • $18.00
    <strong>Features:</strong> <ul> <li>Revolutionary dual-element design represents a ground-breaking transducer achievement</li> <li>Two elements (condenser and dynamic) are enclosed in a single housing</li> <li>Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell</li> <li>Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones</li> <li>Robust design for enduring dependability on the road</li> <li>Integral 80 Hz HPF switch and 10 dB pad on condenser element</li> <li>Includes isolation clamp for shock protection, secure mounting and easy positioning</li> <li>Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each element</li> </ul> <strong>Specifications:</strong> <ul> <li><strong>Polar Pattern:</strong> Cardioid</li> <li><strong>Frequency Response:</strong> 20-17,000 Hz (condenser) 30-10,000 Hz (dynamic)</li> <li><strong>Low Frequency Roll Off:</strong> 80 Hz, 12 dB/octave (condenser)</li> <li><strong>Open Circuit Sensitivity:</strong> -51 dB (2.8 mV) re 1V at 1 Pa (condenser) -54 dB (1.9 mV) re 1V at 1 Pa (dynamic)</li> <li><strong>Impedance:</strong> 100 ohms (condenser) 600 ohms (dynamic)</li> <li><strong>Maximum Input Sound Level:</strong> 148 dB SPL, 1 kHz at 1% T.H.D. (condenser); 158 dB SPL, with 10 dB pad (nominal)</li> <li><strong>Dynamic Range:</strong> 124 dB, 1 kHz at Max SPL (condenser)</li> <li><strong>Signal to Noise Ratio:</strong> 70 dB, 1 kHz at 1 Pa (condenser)</li> <li><strong>Phantom Power Requirements:</strong> 11-52V DC, 3 mA typical (condenser)</li> <li><strong>Weight:</strong> 13.8 oz (390 g)</li> <li><strong>Dimensions:</strong> 6.50" (165.0 mm) long, 2.17" (55.0 mm) maximum diameter</li> <li><strong>Output Connector:</strong> Integral 5-pin XLRM-type</li> <li><strong>Cable:</strong> 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors</li> <li><strong>Accessories:</strong> AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch</li> </ul>
    Reserve Now

  • AUDIO TECHNICA – 4050 MULTI-PATTERN CONDENSER MICROPHONE

    Hire
    • $36.00
    <table class="productlist lists"> <tbody> <tr> <td class="specs">ELEMENT</td> <td>Externally-polarized (DC bias) condenser</td> </tr> <tr> <td class="specs">POLAR PATTERNS</td> <td>Cardioid, Omnidirectional, Figure-of-eight</td> </tr> <tr> <td class="specs">FREQUENCY RESPONSE</td> <td>20-18,000 Hz</td> </tr> <tr> <td class="specs">LOW FREQUENCY ROLL-OFF</td> <td>80 Hz, 12 dB/octave</td> </tr> <tr> <td class="specs">OPEN CIRCUIT SENSITIVITY</td> <td>-36 dB (15.8 mV), re 1V at 1 Pa</td> </tr> <tr> <td class="specs">IMPEDANCE</td> <td>100 ohms</td> </tr> <tr> <td class="specs">MAXIMUM INPUT SOUND LEVEL</td> <td>149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)</td> </tr> <tr> <td class="specs">NOISE</td> <td>17 dB</td> </tr> <tr> <td class="specs">DYNAMIC RANGE (typical)</td> <td>132 dB, 1 kHz at Max SPL</td> </tr> <tr> <td class="specs">SIGNAL-TO-NOISE RATIO</td> <td>77 dB, 1 kHz at 1 Pa</td> </tr> <tr> <td class="specs">PHANTOM POWER REQUIREMENTS</td> <td>48V DC, 4.2 mA typical</td> </tr> <tr> <td class="specs">SWITCHES</td> <td>Polar selection; Flat, roll-off; 10 dB pad (nominal)</td> </tr> <tr> <td class="specs">WEIGHT</td> <td>18.0 oz (510 g)</td> </tr> <tr> <td class="specs">DIMENSIONS</td> <td>7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter</td> </tr> <tr> <td class="specs">OUTPUT CONNECTORS</td> <td>Integral 3-pin XLRM-type</td> </tr> <tr> <td class="specs">ACCESSORIES FURNISHED</td> <td>AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case</td> </tr> <tr> <td class="specs">AUDIO-TECHNICA CASE STYLE</td> <td>R1</td> </tr> </tbody> </table>
    Reserve Now