0

Cart

Reserve Now – It’s as Easy as 1, 2, 3!

SHURE – KSM 109

Hire
  • $18.00

Features:

  • Incredibly smooth high end and tight, controlled bass
  • Extended 20Hz-20kHz frequency response
  • Tight cardioid pattern
  • Transformerless Class-A preamp circuitry
  • Switchable -15dB pad



Category:

SHURE – KSM 109
CARDIOID CONDENSER MIC

The Shure KSM109 Cardioid Studio Condenser Mic delivers incredibly smooth high end and tight, controlled bass with extended 20Hz-20kHz frequency response. It features a tight cardioid pattern, transformerless Class-A preamp circuitry, outstanding transparency without crossover distortion, and a switchable -15dB pad. It’s a microphone that excels in capturing acoustic and wind instruments as well as overhead, ensemble, and room ambience recording. Includes windscreen and carrying bag.

Requires phantom power.

Additional information

Rental Pricing

Weekend Rate, Week Rate, 10 Day Rate, 14 Day Rate

Other Rental Options

  • AUDIX – MICROPOD18 W/BASE

    Hire
    • $36.00
    <strong>Specifications:</strong> <ul> <li style="list-style-type: none;"> <ul> <li>Transducer Type: Condenser</li> </ul> </li> </ul> Frequency Response: 50 Hz – 19 kHz Polar Pattern: Cardioid, Hypercardioid, Shotgun Output Impedance: 150 ohms Sensitivity: 9 mV (C), 8 mV (HC) , 62 mV (S) / Pa @ 1k Equivalent Noise Level: 21 dB (A-weighted) Signal to Noise Ratio: 73 dB Maximum SPL: ≥140 dB Dynamic Range: 119 dB Power Requirements: 18 – 52 V Connector: 3 pin mini-XLRm Materials / Finish: Machined brass / Black Finish Weight of M1250B: 20 g / 0.7 oz Length of M1250B: 54 mm / 2.1 in Length of Goosenecks: 157.5 mm / 373 mm / 430 mm 6” GN / 12” GN / 18” GN
    Reserve Now

  • SENNHEISER – E604

    Hire
    • $9.00
    <strong>Features:</strong> <ul> <li>Rugged reinforced glass-fibre body</li> <li>Low sensitivity to impact and handling noise</li> <li>Very high sound pressure handling capability</li> <li>Low distortion microphone</li> <li>Hum compensating coil</li> <li>Easy to position due to compact design</li> <li>Integral stand mount</li> </ul>
    Reserve Now

  • SHURE – BETA 87

    Hire
    • $12.60
    <strong>Features:</strong> <ul> <li>Smooth frequency response with gradual presence rise</li> <li>Highly consistent supercardioid polar pattern provides superior gain-before-feedback</li> <li>Electronic low-frequency roll-off compensates for proximity effect</li> <li>Wide dynamic range (117 dB) and low distortion characteristics</li> <li>Very low susceptibility to RFI and electromagnetic hum</li> <li>Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise</li> <li>Built-in pop filter reduces undesirable wind and breath sounds</li> <li>Legendary Shure quality and reliability</li> </ul> <strong>Specifications:</strong> <ul> <li>Type: Condenser (electret bias)</li> <li>Frequency Response: 50 to 20,000 Hz</li> <li>Polar Pattern: Supercardioid</li> <li>Phantom power required?: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3, Current Drain: 1.0 to 1.2 mA</li> </ul>
    Reserve Now

  • SHURE – BETA 58

    Hire
    • $12.60
    <strong>Features:</strong> <ul> <li>Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect</li> <li>Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound</li> <li>Neodymium magnet for high signal–to–noise output</li> <li>Hardened steel mesh grille that resists wear and abuse</li> <li>Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration</li> <li>Minimally effected by varying load impedance</li> <li>Legendary Shure quality and reliability</li> </ul> <strong>Specifications:</strong> <ul> <li>Type: Dynamic (moving coil)</li> <li>Frequency Response:50 to 16,000 Hz</li> <li>Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.</li> <li>Output Level: Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL</li> </ul>
    Reserve Now